:: Making a Bucket Bong          Print

The bucket is probably the most easy way of smoking cannabis, it requires minimum effort to make, and can have strong effects. Please note, this can also be carried out in a sink or a bath.

Please note, you will need to make a mix to smoke buckets.

You will need:

A Bucket (or similar container, around 100cm high)              A spoon

A Plastic bottle with the base cut off

Step One

Fill your bucket (or container you have chosen) with water, to a level as high as possible.

Step Two

Take your spoon, half cut bottle and foil and wrap the foil round the thin end of the spoon, then round the top of the bottle making a “Gauze with a handle”.

Now, that’s all your need to make for this method of smoking. The rest is just an explanation of how to smoke using this method.

Put your cut-off bottle in the water, and push the bottle down, so only the neck of the bottle is visible above the water

Now stack your gauze with your smoking mix, and then place the gauze on the bottles head. Slowly pull up the bottle, out of the water while burning the mix on the gauze (with the gauze still on the head of the bottle) the bottle should start to fill with smoke. Pull the bottle as high as you can, then remove the gauze using the spoon as a handle, and put your mouth around the head of the bottle, press the bottle back down into the water, and breath in as hard as you can…. And feel the effects.

Created by The Piggin Empire – www.pigginempire.co.uk